Відео

Miami By Will Smith Laid-back Luke mix Remix

Hi dave sorry to ask do you know if I can change the on off swich on a viper esc

Hi Dave I've watched your videos on UA-cam and wondered if you can help me, buy the way, I'm a complete noob with RC but I can use a soldering iron. I have an old BSA Lakestar (Original Big Size) but it is FUBAR, I would like to convert it to 2.4ghz. I'ved looked at a FLYSKY FS-I6 2.4GHz 6 Channel Remote Controller Rc Transmitter and receiver. Would this be okay to use? I am hoping to use the mtroniks viper marine if they still work, I do know that one of the motors has burnt out, could recommend a replacement and I will replace both. The main problem for me is the hoppers and LEDS and how to incorporate these into the build, could you please offer any advice TIA P.S I don't have a big budget.

hi mate my name is dave im upgrading my mk3 microcat bait boat so all striped out keeping it running on 12v can you give me some advice on which esc i should use many thanks dave

How did you build that hull I love the design of it?

Hi dave to complecated for me I have a HD would you be able to mod it for me?

What did it cost you to do every modification?

Brilliant mods mate FairPlay I've picked up a microcat boat myself second hand and I think what you have done is genious, where did you get the servo holders from please and all the bolts from that episode Thanks Stefan

Hi Dave, I have switched the Esc out for 2 hobbywing quickrun 880 dual Esc. This Esc has 2 motor output sets of wires.(2xblue 2xyellow) How should I connect the Esc wires to the right and left set of pumps? Positive direct from the switch to the positive of the pumps and blue wires from the Esc to the negative of the pumps?

Hi dave do you do repairs as my jet has gone on my bost and I won't be able to do that I'm.afraid. thank you Roger

Hi Dave do you carry out repairs as I'm unable to split my boat because of arthritis in my hands and I need a new jet replaced

Thank you very much for your videos.

ua-cam.com/video/R83OZBHtLvk/v-deo.htmlfeature=shared

Real nice series. I just finished my build following Dave step by step. I had some experience with drones so that helped me a lot with soldering. I did not do the last mod on the lid. Just glued it back in (original) design. I also put a 3 camera switch system in the boat for fpv/hull/winch camera with controle on the radio. I topped it off with a hook release on the back. Test went great so big shout out to you @Dave🤟👍

I came across these videos whilst searching for a way to add gps with autopilot and swap my Microcat MK2 to 2.4gz. I have a few questions for you. Firstly how did you get the old esc boxes off the pumps and side of the boat. They seem stuck fast on my boat and the body is so flimsy. Also the LEDs and other stuff is plastered in a grey sealing substance that is hard as nails, looks like it was on your MK1 too. Did you bur that out with a Dremel. Finally my boat does not seem to have the caps across the pump wires for each pump but has just one on the feed into the black box. Should I do the same or swap and put one on each pump. In you opinion could the lid mod be achieved using 3d printed parts to make the frames

What about the tecnicat

🎉hi I’ve a microcat and broken the charger last year Iam really missing the edge it gives do you do the conversion for others plz

Hi Dave great video’s I am a little confused as a novice with RC controls and ESC units. How does the single ESC unit work with the two pumps on each side . I went into my local RC shop and they gave 2 dual drive ESC units ( Hobbywing Quick run 880 brushed controllers) your help would be appreciated

Hiya mate I've got an led gone on my microcat and the fish finder has stopped. Is that something you can fix ? If so how much we talking

Hi there, can you tell me why are you using 4s lipo's? Would 3s not be more than adequate?

Hi Dave, I got the hopper mod done and making the wiring complete.😊 I did see on the video that you plug in the red wires from the BEC of Esc's in the receiver. Did you not burn your receiver? I think you may only use 1 red wire if you use multiple Esc setup?

Nicely done m8. Verry nice video again like before👍!! I have a question about the remote switch. I thinking about to use the original on/off switch on the boat. How should you wire it up and is it possible to do with the mosfet i already ordered?

Nice video again.👍 Parts are on the way and looking forward to the build. I first want to get the pump prime mod done. But I cant find a video and parts list for it. Can't be that difficute i think?

Nice video series👍 I finished part 1 already, and looking forward to the build.

Hello. I've seen the tutorial, I'd still like to know what price you estimate this boat at now?

Great videos Dave, and extremely helpful. Just a quick question. Does it matter which 12v remote control you use? Your link is for 6 channel but does it matter how many channels it has? Thanks

Dear Dave, I have a question. I bought the esc ‘s you suggested in the video from aliexpress. This esc only has a black and red wire. No blue and yellow as the one in your video. Should I just put the black on the black one and red on red? And what does this mean, that it only has forward and reverse? Thank you in advance!

Wauw! Great project, i love it 👌💪! A Skarp S60 Mod to brushless engines and lithium ion batteries can be cool. I am working on such a mod myself, but the feeder hatch magnets are challenging anyway.

Hi Dave great video how much would all that cost to fit replace if someone wanted it done cheers

Hi. I am just about to starting to mod my mk3 microcat, and these tutorials are of great help. So thank you soo much.

Hi mate do you have a wireing diagram at all please

Hi again Dave, I have just finished all the wiring apart from the led's. I'm now having problems setting up my transmitter! I'm using the flysky fs-i6x, but just can't get my head around the set up any help ie step by step guide would be appreciated. Cheeky I know but thank in advance Kieron.

Hello Dave, I'll echo what people are saying, what you do is amazing 🤯 im sure you've been asked loads of times but is it just your own boat you modify or do you do the general public? I have a microcat and very interested in the door servo conversion you do, also i fish a weedy water, is there anything you know of to stop the doors catching on the weed once opened? I know, drive round it lol. Great videos Dave 👏 look forward to hearing from you. Jason

I do like that controller, but quite a few of them features as in the telemetry is just stuff that is of no reel use. But it is hands down 100% better than the old standard breeze block controller. How much are they now out of interest?...

Is there any cheaper controllers than this one FrSky X-Lite S 2.4GHz Radio Controller As its out of stock. I just need one to get started for now as i purchased a technics mak 1 which appears to be dead. :(

Hi Dave, quick question will 2 Hobbywing Quicrun 1060 60A ESCs work? Or do i need to get something with a better voltage rating.

I followed Dave's advice on rebuilding the boat to the letter and I really recommend his mods. I've been using it for the past 12 months and it has been really reliable. Thanks very much Dave :)

awesome just what i've been looking for :)

2258 views but only 63 likes. Some people don't respect your time or skills. :(

Hi I was just wondering what sealant you use to re seal it if you wernt doing the lid upgrade ?

What size bleed nipples are used in the motors and in the back of the boat to make it a non prime. Thanks

Wow that’s some boat mate, bravo. How much did it all set you back if you don’t mind me asking?

Been thinking of getting an old viper X-range and redoing it all but haven't got a clue what am doing, haha

Hi dave do you have to modify ESCs to wire both leads to negatives on motors?

Hi, I've just got one of these old boats and am going to try to update it similar to yours. Are the servos just standard types? And which esc did you use? cheers Steve

How much would this boat cost of you was to.sell it

more please

Hi Dave I have got to the part I’ve always struggled with I can’t get the remote to work I’ve got one lighting up but nothing on the mossfit have no idea how to wire it up apart from input to the box can you recommend a remote box ie the one you use or another similar ime so close but seemingly miles away what are the parameters for wiring the wires to the mossfit so it lights up it’s embarrassing me not getting past this simple😢 step the latest part I bought was for 85/ 250 v stupid I know but I did say I was stupid with this stuff

Great video series! Really enjoyed watching them. Please show us some more. I'd love to learn how to add GPS and the camera options to the boat. Thank you again and keep up the amazing videos.

Ime an oap and hopeless with electrics but have followed your conversion and nearly finished my microcat upgrade I’ve done 2.4 g conversions to all sorts of baitboats but that was 15 years ago I thought maybe you could do a set of wiring that would help us duffers I struggled to do mine but its ready to be put in now just got to attach relay and mossfit well done you !!!